Overview: Bambu Lab built their entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption. They choose the packaging material carefully to minimise the use of non-recyclable material.
Since 3D Marvels uses an enormous amount of these, we offer to sell these reusable spools at a discount.
How come we have too many? Because Bambu Lab can’t always deliver our refills fast enough, we sometimes have to resort to buying filaments with the spool. Let’s reuse, reduce and recycle together!
Specification:
- Materials: ABS
- Temperature Resistance: ≤70℃
- Packing Size: 200*200*67 mm
- Weight: 250g
- Color: White or Transparent
- Filament Compatibility: PLA, PETG
Instructions for Printed Spool
When you’re finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
FilamentHub Limited
3D Marvels
info@3dmarvels.ie | Ballincollig Commercial Park, Link Road, Unit 6
Safety Information for 3D Printed Items in PLA
Product Material These items are 3D printed using Polylactic Acid (PLA) – a
biodegradable thermoplastic made from renewable resources such as corn starch.
Important Safety Warnings
NOT SUITABLE FOR CHILDREN
YOUNGER THAN 5 YEARS
Small parts may pose a choking hazard. Keep out of reach of young children.
Do not use for food or beverage contact. The layered structure of 3D prints can
harbour bacteria.
Usage & Care
Do not expose to temperatures above 60°C (140°F) – PLA may soften or
deform.
Some designs may have sharp edges or points.
Handle with care. Keep away from open flames or high heat sources.
• Intended for decorative, collector, and general non-food use only.
• Clean gently with mild soap and lukewarm water if needed. Avoid harsh chemicals or
dishwashers.
• Avoid prolonged direct sunlight to maintain color and shape.
Disposal & Recycling
PLA is recyclable and industrially compostable. Please check your
local recycling facilities and follow local regulations for proper disposal.
Manufacturer Declaration FilamentHub LTD declares that these 3D printed PLA items
comply with the EU General Product Safety Regulation (GPSR) and applicable health &
safety requirements.
The CE marking indicates conformity with relevant EU directives.
For any questions or further information, please contact: info@3dmarvels.ie
Made in Ireland
