Bambu PLA Basic
Bambu PLA Basic is a plain filament with a similar look to regular plastic, without any of the drawbacks. It is highly durable & recyclable.
With Bambu’s exclusive fine-tuned formulation based on 3D printing expertise and settings, Bambu PLA Basic delivers stronger layer adhesion, enhanced impact resistance, and long-lasting durability compared to other standard PLA filaments on the market. Additionally, it reaches a print speed up to 258mm/s*, cutting your printing time without compromising quality. * 0.4mm nozzle, 0.4mm line width, 0.2mm layer height.
- Easy to Print & Beginner Friendly
- Smooth Surface Finish
- Biodegradable
- Low indoor printing emissions, certified to UL GREENGUARD 2904
- Diameter: 1.75mm +/- 0.03mm
- All AMS Series Compatible
UL GREENGUARD certified. Cleaner air for indoor printing.
PLA Basic is certified to UL GREENGUARD (UL 2904), the recognized standard for 3D printer emissions. The particles and VOCs released measure below the levels of an average kitchen, living room, or office—cleaner than the air you’re already breathing.
Parameters Comparison
Learn more different filaments comparison on Bambu Filament Guide >>
| PLA Basic |
PETG HF
|
PETG Basic | |
| Printing Speed* | ~ 300 mm/s |
~ 300 mm/s
|
~ 200 mm/s |
| Preset Printing Speed* | 258 mm/s |
258 mm/s
|
172 mm/s |
| Strength (Bending Strength – XY) | 76 MPa |
64 MPa
|
65 MPa |
| Stiffness (Bending Modulus – XY) | 2750 MPa |
2050 MPa
|
1670 MPa |
| Layer Strength (Bending Strength – Z) | 59 MPa |
48 MPa
|
48 MPa |
| Layer Adhesion (Impact Strength – Z) | 13.8 kJ/m² |
10.6 kJ/m²
|
13.6 kJ/m² |
| Toughness (Impact Strength – XY) | 26.6 kJ/m² |
31.5 kJ/m²
|
52.7 kJ/m² |
| Heat Resistance (HDT, 0.45 MPa) | 57 °C |
69 °C
|
69 °C |
1. Maximum Printing Speed* refers to the highest speed achievable by the filament while maintaining high print quality, given an appropriate increase in nozzle temperature.
2. Preset Maximum Printing Speed* refers to the highest speed achievable with default settings, ensuring top printing quality in most environments.
Settings: Bambu Lab X1-Carbon, 0.4 mm nozzle, 0.2 mm layer height
FilamentHub Limited
3D Marvels
info@3dmarvels.ie | Ballincollig Commercial Park, Link Road, Unit 6
Safety Information for 3D Printed Items in PLA
Product Material These items are 3D printed using Polylactic Acid (PLA) – a
biodegradable thermoplastic made from renewable resources such as corn starch.
Important Safety WarningsÂ
NOT SUITABLE FOR CHILDREN
YOUNGER THAN 5 YEARS
Small parts may pose a choking hazard. Keep out of reach of young children.
Do not use for food or beverage contact. The layered structure of 3D prints can
harbour bacteria.
Usage & Care
Do not expose to temperatures above 60°C (140°F) – PLA may soften or
deform.
Some designs may have sharp edges or points.
Handle with care. Keep away from open flames or high heat sources.
• Intended for decorative, collector, and general non-food use only.
• Clean gently with mild soap and lukewarm water if needed. Avoid harsh chemicals or
dishwashers.
• Avoid prolonged direct sunlight to maintain color and shape.
Disposal & RecyclingÂ
PLA is recyclable and industrially compostable. Please check your
local recycling facilities and follow local regulations for proper disposal.
Manufacturer Declaration FilamentHub LTD declares that these 3D printed PLA items
comply with the EU General Product Safety Regulation (GPSR) and applicable health &
safety requirements.
The CE marking indicates conformity with relevant EU directives.
For any questions or further information, please contact: info@3dmarvels.ie
Made in Ireland
