PTFE Tube Connector for X1/P1 Bambu Lab Printers
Overview
The PTFE Tube Coupler is a component used to connect the PTFE tube, which is mounted on the back of the printer and used to connect the PTFE tube between the buffer and the tool head. You may need to replace the pneumatic connector when you encounter the following situations:
1. The PTFE tube can not be secured. For example, the PTFE tube can not be fixed on the extruder.
2. The filament cannot pass through the pneumatic connector. For example, the filament cannot pass through the buffer (as shown in the picture below, it may be due to internal damage to the pneumatic connector).
Compatibility
X1 Series and P1 Series
Installation
Learn more about the replacement of the PTFE Tube Coupler (w/o holder)on Bambu Lab Wiki.
Learn more about the replacement of the PTFE Tube Coupler (w/ holder) on Bambu Lab Wiki.
Instructions for use
1. The PTFE Tube Connector is designed with a clear direction of use, as shown in the figure below. Connect the PTFE tube from the buffer output to the IN end, and the PTFE tube from the tool head to the OUT end. It is important to note that reverse connections may cause material blockage, so it is essential to ensure that the installation direction is correct.
2. When AMS is not being used, it is necessary to remove the feed tube connector from the OUT end, disconnect the connection between the feed tube connector and the PTFE tube of the tool head, and directly insert the consumable material wire into the PTFE tube of the tool head.
FilamentHub Limited
3D Marvels
info@3dmarvels.ie | Ballincollig Commercial Park, Link Road, Unit 6
Safety Information for 3D Printed Items in PLA
Product Material These items are 3D printed using Polylactic Acid (PLA) – a
biodegradable thermoplastic made from renewable resources such as corn starch.
Important Safety WarningsÂ
NOT SUITABLE FOR CHILDREN
YOUNGER THAN 5 YEARS
Small parts may pose a choking hazard. Keep out of reach of young children.
Do not use for food or beverage contact. The layered structure of 3D prints can
harbour bacteria.
Usage & Care
Do not expose to temperatures above 60°C (140°F) – PLA may soften or
deform.
Some designs may have sharp edges or points.
Handle with care. Keep away from open flames or high heat sources.
• Intended for decorative, collector, and general non-food use only.
• Clean gently with mild soap and lukewarm water if needed. Avoid harsh chemicals or
dishwashers.
• Avoid prolonged direct sunlight to maintain color and shape.
Disposal & RecyclingÂ
PLA is recyclable and industrially compostable. Please check your
local recycling facilities and follow local regulations for proper disposal.
Manufacturer Declaration FilamentHub LTD declares that these 3D printed PLA items
comply with the EU General Product Safety Regulation (GPSR) and applicable health &
safety requirements.
The CE marking indicates conformity with relevant EU directives.
For any questions or further information, please contact: info@3dmarvels.ie
Made in Ireland
