Bambu PLA Silk+
Why choose between beauty and durability? Bambu PLA Silk+ delivers both with its impressive strength, while still offering a stunning silk gloss finish. Available in a wider range of vibrant colors, this filament lets you bring your boldest ideas to life without compromising on toughness or shine. With Bambu PLA Silk+, you can have it all, strength, style, and performance.
Product Features
- Shiny Like Chrome, Smooth Like Silk
- Enhanced Layer Adhesion
- A Spectrum of Colors
- Effortless Printing, Flawless Results
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- Lower the outer wall speed to 50 mm/s for the best gloss
- Dry Out Before Use
- AMS & AMS lite Compatible
Technical Specifications
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C，8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 210- 240 °C |
| Bed Temperature (with Glue) | 35 – 45 °C |
| Printing Speed | < 250 mm/s |
| Physical Properties | |
| Density | 1.27 g/cm³ |
| Vicat Softening Temperature | 66°C |
| Heat Deflection Temperature | 60°C |
| Melting Temperature | 158 °C |
| Melt Index | 14.5 ±1.27 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 33 ±4 MPa |
| Breaking Elongation Rate | 2.8 ±0.6 % |
| Bending Modulus | 2460 ±210 MPa |
| Bending Strength | 75 ±4 MPa |
| Impact Strength |
18.5 ±1.6 kJ/m² |
FilamentHub Limited
3D Marvels
info@3dmarvels.ie | Ballincollig Commercial Park, Link Road, Unit 6
Safety Information for 3D Printed Items in PLA
Product Material These items are 3D printed using Polylactic Acid (PLA) – a
biodegradable thermoplastic made from renewable resources such as corn starch.
Important Safety Warnings
NOT SUITABLE FOR CHILDREN
YOUNGER THAN 5 YEARS
Small parts may pose a choking hazard. Keep out of reach of young children.
Do not use for food or beverage contact. The layered structure of 3D prints can
harbour bacteria.
Usage & Care
Do not expose to temperatures above 60°C (140°F) – PLA may soften or
deform.
Some designs may have sharp edges or points.
Handle with care. Keep away from open flames or high heat sources.
• Intended for decorative, collector, and general non-food use only.
• Clean gently with mild soap and lukewarm water if needed. Avoid harsh chemicals or
dishwashers.
• Avoid prolonged direct sunlight to maintain color and shape.
Disposal & Recycling
PLA is recyclable and industrially compostable. Please check your
local recycling facilities and follow local regulations for proper disposal.
Manufacturer Declaration FilamentHub LTD declares that these 3D printed PLA items
comply with the EU General Product Safety Regulation (GPSR) and applicable health &
safety requirements.
The CE marking indicates conformity with relevant EU directives.
For any questions or further information, please contact: info@3dmarvels.ie
Made in Ireland
