Bambu Lab Reusable Spool

Overview: Bambu Lab built their entire filament feeding system around a reusable spool design and achieved at least 20% less plastic waste in filament consumption. They choose the packaging material carefully to minimise the use of non-recyclable material.

Since 3D Marvels uses an enormous amount of these, we offer to sell these reusable spools at a discount.

How come we have too many? Because Bambu Lab can't always deliver our refills fast enough, we sometimes have to resort to buying filaments with the spool. Let's reuse, reduce and recycle together!

Specification:

• Materials: ABS
• Temperature Resistance: ≤70℃
• Packing Size: 200*200*67 mm
• Weight: 250g
• Color: White or Transparent
• Filament Compatibility: PLA, PETG
  

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.