Bambu ABS

Bambu ABS

Bambu ABS is a dependable 3D printing material renowned for its exceptional stability, durability, and high impact resistance. Additionally, this filament also boasts excellent heat resistance, making it ideal for projects involving moderate temperatures. With its versatile properties, Bambu ABS filament stands as an excellent choice for a wide range of 3D printing applications.

Strong & Durable

As one of the most widely used filaments, Bambu ABS comes with excellent mechanical properties that make it stronger than normal PLA and PETG. It is ideal for creating functional parts, prototypes, and standard engineering components, ensuring long life and reliability.

Impressive Heat Resistance

Bambu ABS filament offers exceptional heat resistance (Heat Deflection Temperature: 87 °C) coupled with commendable mechanical properties. This makes it an outstanding choice for everyday functional parts that require high-temperature resistance.

Water-Resistant

Boasting excellent water-resistant performance, Bambu ABS ensures relatively long-lasting durability when used in a wet environment.

Tough with High Impact Resistance

Bambu ABS is exceptionally robust, and its prints can withstand multiple impacts, collisions, and falls. It exhibits good impact resistance even at low temperatures.

Accessory Compatibility

RecommendedNot RecommendedBuild PlateSmooth PEI Plate, Textured PEI PlateCool Plate SuperTackHotendAll Size / Material/GlueBambu Liquid GlueGlue Stick/

ABS Hex Code Table

ColorHex CodeDisplayOlive#789D4ATangerine Yellow#FFC72CAzure#489FDFNavy Blue#0C2340White#FFFFFFSilver#87909ARed#D32941Orange#FF6A13Bambu Green#00AE42Blue#0A2CA5Black#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing SettingsDrying Settings (Blast Drying Oven)80 °C，8 hPrinting and Keeping Container's Humidity< 20% RH (Sealed，with Desiccant)Nozzle Temperature240 - 270 °CBed Temperature (with Glue)80 - 100 °CPrinting Speed< 300 mm/sPhysical PropertiesDensity1.05 g/cm³Vicat Softening Temperature94 °CHeat Deflection Temperature87 °CMelting Temperature200 °CMelt Index34.2 ± 3.8 g/10 minMechanical PropertiesTensile Strength33 ± 3 MPaBreaking Elongation Rate10.5 ± 1.0 %Bending Modulus1880 ± 110 MPaBending Strength62 ± 4 MPaImpact Strength39 ± 3.6 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.

• Drying conditions: 80℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• ABS is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density model. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.